Network Cable Line Tester Finder LCD Audio Length Checker Patrol Instrument

Description

Network Cable Line Tester Finder LCD Audio Length Checker Patrol Instrument
Description
Cable Length Measurement up to 1200M
Measuring cable length to opens up to 1200M. Calibration accuracy: ±3%
Length measurement in feet, yard or meters
Cable length measurements without remote attached
Calibration Parameters
Can determine actual Calibration parameters with known length of cable for cable length test
Allows setting 1-7 Calibration parameters
Wire Tracing up to 3KM
The tone and probe kit let you easily tracking wire directly in connection with live telecommunication equipment and router
Cable Mapping & status Indication
Display the result of pin to pin cable mapping
Display cable status and troubleshoot wiring for continuity, shorts, opens and crossover.
Max support to 8 remote units
Non Contact Voltage detection
Tests voltage from 90 ~ 1000V, special design to make sure the power is off before testing for circuit protection
MT-7071 Toner specifications
Cable types tested
RJ45 Lan cable Cat 5,5e,6,7 (UTP/STP),RJ11/12 Telephone cable Cat 3 (2/4/6 pin),Coaxial cable & normal solid/Stranded wire by alligator clips patch cord
Cable test modes
1 KHz two-note tones for location and isolating cables, wire mapping for validate (detects wire continuity, shorts, opens, miswired, crossover) and open length tested.
Measurement technology
Cable capacitance method
Max. distance to opens for test
1,200 meter (4,000 feet/1,300 yard)
Min. distance to opens for test
Split pairs:1 meter (3 feet),Other cable:1.25 meter (4 feet)
Typical accuracy of length test
±3.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard)
Calibration accuracy of length test
±2.0% (±0.5 meter/ ±1.5 feet/ ±0.5 yard), standard cable ＞10 meter
Resolution & Unit of length test
0.1 meter/ feet/ yard, Rate:1~3 sec./time
Calibrating parameters memory
1~7 sets, allowing rewrite by new calibrating parameters
Max. distance of transmission & cable map
3 km(1 kHz) & 300 m
Cable map & Shielded indication
LCD 1~8 & G
Other functions
Continuity test, Live telecommunication equipment test and router tes, Voltage protection AC 60V or DC 48V, Auto power off, Low battery display
Dimension (L×W×D)
138×80×35 mm
MT-7071 Receiver specifications
Signal status indication
1 kHz , 1 LED & Buzzer, bulding ear jack
NCV indication & LED illumination
1 LED (AC90~1000V) & 1 LED
Dimension (L×W×D)
198×45×33 mm
MT-7071 Remote unit specifications
Remote unit
1 pcs, max. support to 8 pcs (optional)
Compatible connectors
RJ45(8 pin),RJ11/12(6 pin),BNC connectors
Remote unit dimension (L×W×D)
90×32×30mm
Accessories
RJ45 cable patch cord,RJ11/12 cable patch cord, Alligator clips patch cord,Earphone,pounch bag